드론/멀티콥터
     D_자동차(종류별)
     스케일 악세서리
     바디/액세서리
     타이어,휠/액세서리
     자동차 공통부품
     쇽/쇽파트
     부품리스트(자동차)
     보트/요트
     조종기/액세서리
     엔진/부품
     엔진부품리스트
     머플러,매니폴드/액세서리
     연료,시동용구/액세서리
     모터,변속기/액세서리
     충전기,배터리/액세서리
     오일,접착제,케이블
     나사,너트,와셔,링
     RC공구/셋팅게이지
     캐리어백/케이스/기타
     멀티콥터/헬기/비행기
     부품리스트(헬기)
     철도모형
     카탈로그/책
     헬기키트
     기타부품

현재위치 HOME >>모터,변속기/액세서리 >>전자변속기(브러시리스모터용)

 Havoc Pro/Ballistic Brushless System (10.5T / 4,200Kv)
 상품코드 NV3133
 권장가격 306,000 원
 판매가격 306,000 원
 제조사 NOVAK
 적립금 3,060 원
 
 구매수 재고없음
관련상품


현재 품절된 상품입니다.



HAVOC PRO/BALLISTIC BRUSHLESS SYSTEM FEATURES
Sensor-based for excellent torque and low-speed driveability
Oversized front bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
Rebuildable motor design with removable shielded sensor harness, rotor, sensor assembly, wound stator, bearing cap, hardware, sleeve and both end bells
Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125” pinion shaft that accepts all existing pinion gears
Nine adjustable parameters: Minimum Brake (10 settings from 0-30%), Drag Brake (10 settings from 0-30%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-12%), Throttle Curve (Linear, Expo-1 and Expo-2), Brake Frequency (7 settings from 1-8 kHz), Reverse, Motor Rotation and Battery Pack Selection (Li-Po, Li-Fe, Ni-MH)
Fifty percent more transistors than the Havoc 2S ESC for faster speeds, higher efficiency and increased load handling
One-Touch Set-Up for quick, easy transmitter setup
Locked Rotor Detection and Thermal Overload Protection (when used with a Novak sensored brushless motor)
Novak’s Radio-Priority and Polar Drive Circuits
Included 30x30x6mm ESC clear cooling fan (#5648) mounted on factory-installed heat sink
Meets RoHS compliance and includes 120-Day Warranty
Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components

　
NOVAK’S HAVOC PRO/BALLISTIC BRUSHLESS SYSTEM SPECIFICATIONS
System Motor Turns
3.5T
6.5T
10.5T
13.5T
17.5T

Part Number
#3130
#3132
#3133
#3134
#3135
Color-Coded Stator
Black
Black
Blue
Orange
Yellow
Kv (unloaded)
10,500 RPM/Volt
6,400
RPM/Volt
4,200
RPM/Volt
3,300
RPM/Volt
2,200
RPM/Volt
Watts
620
390
235
195
130
Motor Size
2.07” x 1.41” (52.6 x 35.8 mm)
System Weight (w/o wires)
7.96 oz. (225.7 g)
Input Voltage
2S Li-Po cells, 2S Li-Fe cells or 4-6 NiMH cells (1.2V/cell)
ESC Footprint
1.16” x 1.49” (29.5 x 37.8mm)
Motor Limit
All 3.5-turn Novak 540-size sensored brushless motors
On-Resistance
0.00040 ohms @ 25°
BEC
6.0 volts DC / 3.0 amps
Rated Current
540 Amps @ 25°C trans. temp.
Braking Current
540 Amps @ 25°C trans. temp.
Status LEDs
4
Voltage Cut-Off
6.25V (Li-Po), 4.75V (Li-Fe)
Power Wires (battery/motor)
14G Super-Flex Copper-Strand Silicone Wire
Recommended Use
On-Road High Traction / Basher
Off-Road Medium Traction / Basher
10.5T spec-brushless racing
13.5T spec-brushless racing
17.5T spec-brushless racing

　
REPLACEMENT / OPTIONAL PARTS
#5315 or #5320 User-replaceable Input Harness (replacement)
#5351-#5353 Brushless Shielded Sensor Harnesses – 4”, 6” & 9”  (replacement/optional)
#5416-#5418 Brushless Motor Cooling Kit (optional)
#5508 14G Brushless Motor & Battery Wire Set (replacement)
#5602 Remote Power Programming Switch (replacement)
#5648/#5652 Clear Cooling Fan 30x30x6mm (replacement)
#5679 Racing Power Trans-Cap Module -- 2S Li-Po and 4-6 cell Ni-MH(replacement)
#5731 3.5mm Low-Loss Power Connector – 5 pairs (optional)
#5909 Sintered Tuning Rotor-13mm (optional)
#5940 Ballistic Front End Bell and Bearings – 1/8” (replacement)
#5941 Ballistic Sintered Rotor -- 12.3mm (replacement)
#S5420-#S5424 Brushless Motor Sleeves (replacement/optional)
#S5932 Ballistic Motor Hardware Kit (replacement)
#S5942 Ballistic Timing/Sensor Assembly (replacement)
#S5943 Ballistic Bearing Cap with Rear Bearing (replacement)
#S5944 Ballistic Back End Bell (replacement)
#S6603-#S6621 Ballistic Hand-Wound Stator -- 3.5T - 21.5T (replacement/optional)


  이용안내 - 마이쇼핑 - 장바구니 - 신제품리뷰 - 개인정보취급방침 - 자료실 - 고객게시판