드론/멀티콥터
     D_자동차(종류별)
     스케일 악세서리
     바디/액세서리
     타이어,휠/액세서리
     자동차 공통부품
     쇽/쇽파트
     부품리스트(자동차)
     보트/요트
     조종기/액세서리
     엔진/부품
     엔진부품리스트
     머플러,매니폴드/액세서리
     연료,시동용구/액세서리
     모터,변속기/액세서리
     충전기,배터리/액세서리
     오일,접착제,케이블
     나사,너트,와셔,링
     RC공구/셋팅게이지
     캐리어백/케이스/기타
     멀티콥터/헬기/비행기
     부품리스트(헬기)
     철도모형
     카탈로그/책
     헬기키트
     기타부품

현재위치 HOME >>모터,변속기/액세서리 >>전자변속기(브러시리스모터용)

 GOAT 3S CRAWLER BRUSHLESS SYSTEMS
 상품코드 NV3028
 권장가격 311,000 원
 판매가격 311,000 원
 제조사 NOVAK
 적립금 3,110 원
 
 구매수 재고없음
관련상품


현재 품절된 상품입니다.



OAT 3S CRAWLER BRUSHLESS SYSTEM FEATURES
User-friendly interface with six adjustable parameters: Drag Brake (10 settings), Dead Band (5 settings), Minimum Drive (5 settings), Drive Frequency in brush mode (7 settings), Li-Po Cut-Off  and Reverse Motor Rotation
Water-resistant case with gasket seal
Sensor-based for excellent braking and low-speed driveability
Four status LEDs for easy programming and trouble shooting
Auto Detect Brushed Motor Mode, Locked Rotor Detection and Thermal Overload Protection
Oversized front motor bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
Completely rebuildable motor design
Nickel-plated Crawling Sintered Tuning Rotor -- 14mm (#5950) with 0.125” pinion shaft that accepts all existing pinion gears included with Ballistic Crawler motors.
Meets RoHS compliance and includes 120-Day Warranty
Designed and assembled by Novak in Irvine, Calif., using globally-sourced components
 
GOAT 3S CRAWLER BRUSHLESS SYSTEM SPECS
Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell)
System weight: 10.3 oz. (292.0 g)
ESC Footprint: 1.18” x 1.54” (30.0 x 39.1 mm)
Design: Sensor-based
Motor Size: 2.07” x 1.41” (52.6 x 35.8mm)
Motor Limit: 13.5-turn (2S Li-Po) & 18.5-turn (3S Li-Po) Novak 540-size sensored brushless; 27-turn (2S Li-Po) & 33-turn (3S Li-Po) 540-sized brush motor
Kv: 1,650 (#3618); 1,350 RPM/VOLT (#3619)
Sensor Harness: 9” (230mm)
On-Resistance (brushless): 0.00070 ohms @ 25°C trans. temp.
BECs: 6.0 volts DC/5.0 amps; 6.0 volts DC/3.0 amps switching regulator (external)
Rated/Braking Current: 150 Amps @ 25°C trans. temp.
Status LEDs: 4
Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when Li-Poly Cut-Off Circuitry is enabled)
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire
Watts: 119 (#3618), 85 (#3619)
 
REPLACEMENT / OPTIONAL PARTS
#5315 (optional) or #5320 (replacement) User-replaceable Input Harness
#5351-#5353 Brushless Shielded Sensor Harnesses – 4” & 6” (optional) 9” (replacement)
#5463 3-Amp High-Voltage Universal BEC (optional)
#5508 14-Gauge Silicone Brushless Wire Set (replacement)
#5600 Switch Harness (replacement)
#5647 Black Cooling Fan 25x25x10mm (replacement)
#5679 Racing Power Trans-Cap Module - 2S Li-Po and 4-6 cell NiMH (replacement)
#5686 Power Trans-Cap Module – 3S Li-Po  (replacement)
#5731 Low-Loss Power Connectors – 3.5mm (optional)
#5940 Ballistic Front End Bell and Bearings – 1/8” (replacement)
#5941 Ballistic Sintered Rotor – 12.3mm (optional)
#5950 Crawling Sintered Tuning Rotor - 14mm (replacement)
#S5357 & #S5358 Brushless Motor Shielded Sensor Extension Harness – 4" & 9” (optional)
#S5420-#S5424 Brushless Motor Sleeves (replacement/optional)
#S5603 Remote Programming Switch – Hardwired (replacement)
#S5932 Ballistic Motor Hardware Kit (replacement)
#S5943 Ballistic Bearing Cap/Replacement Rear Bearing (replacement)
#S5944 Ballistic Back End Bell (replacement)
#S5945 Ballistic Crawler Sensor Assembly (replacement)
#S6613-#S6621 Ballistic Wound Stators – 13.5T-21.5T (replacement/optional)


  이용안내 - 마이쇼핑 - 장바구니 - 신제품리뷰 - 개인정보취급방침 - 자료실 - 고객게시판